CF4, CF5

Continuous flow units meter ingredients by weight. The ingredients are weighed as they move through a patented weighing auger. Therefore accuracy is maintained even when ingredient density (test weight) changes.

A continuous flow mixing system consists of multiple units working together.  Each unit meters into a common collection auger.  A superb quality of mix is obtained because each ingredient is added to the other ingredients flowing through the collection auger.

These units are the key to the Feedpro™ family of continuous flow units. They are used daily in hundreds of installations across the U.S. and Canada.

Capacity

These units are available in two basic sizes: 4" diameter weighing auger (CF4) and 5" diameter (CF5).  (See also CF8 heading for 8" diameter units).  Approximate flowrate ranges for the two sizes are as follows:

                                    CF4 flowrates          CF5 flowrates

Barley Malt           250-3,200 lb/hr              400-5,500 lb/hr

 

Special slow CF4 units can meter meal type ingredients as low as 140 lb/hr, and special fast CF4 units can meter up to 4000 lb/hr.

 

Features

Small size 9"x47" footprint

Can be auger-fed from tank, or gravity fed from overhead bin

Wide temperature range components (-20 to +110 F)

Low power requirement: 230V, 1 phase, 5 amp max

Polyethylene hopper

 

Accessories

Hopper top with hinged access door for auger-fed ingredients

Magnets to remove metal from feed ingredients

Hopper top extension to reduce infeed auger cycling for high flow ingredients

Discharge chute to fit 3½", 4", or 6" cross auger

1.641.628.3103

© 2016 Agtronix™. All Rights Reserved